Apple Watch Magnetic Charger to USB-C Cable (0.3 m)

0.3m USB-C connection

We wanted to make charging your Apple Watch utterly effortless. Simply hold the connector near the back of the watch, where magnets cause it to snap into place automatically. It’s a completely sealed system free of exposed contacts. And it’s very forgiving, requiring no precise alignment.

Apple Watch Magnetic Charging Dock

Diameter: 10.4 cm | Height: 1.27 cm

With the Apple Watch Magnetic Charging Dock, you can charge your Apple Watch in a flat position with its strap open, or on its side. When docked on its side, your watch automatically goes into Bedside mode, so you can also use it as your alarm clock. The Apple Watch Magnetic Charging Dock uses the same inductive charging connector that comes with Apple Watch. It charges all Apple Watch models and sizes. And it connects via the Lightning to USB Cable and Apple 5W USB Power Adapter.

Apple Watch Magnetic Charging Cable (1 m)

1m

We wanted to make charging your Apple Watch utterly effortless. So we arrived at a solution that combines our MagSafe technology with inductive charging. It’s a completely sealed system free of exposed contacts. And it’s very forgiving, requiring no precise alignment. You simply hold the connector near the back of the watch, where magnets cause it to snap into place automatically.

Apple Watch Magnetic Charging Cable (0.3m)

0.3m

We wanted to make charging your Apple Watch utterly effortless. So we arrived at a solution that combines our MagSafe technology with inductive charging. It’s a completely sealed system free of exposed contacts. And it’s very forgiving, requiring no precise alignment. You simply hold the connector near the back of the watch, where magnets cause it to snap into place automatically.

Apple Watch Magnetic Charging Cable (2 m)

We wanted to make charging your Apple Watch utterly effortless. So we arrived at a solution that combines our MagSafe technology with inductive charging. It’s a completely sealed system free of exposed contacts. And it’s very forgiving, requiring no precise alignment. You simply hold the connector near the back of the watch, where magnets cause it to snap into place automatically.

Watch Magnetic Charger to USB-C Cable (0.3 m)

We wanted to make charging your Apple Watch utterly effortless. Simply hold the connector near the back of the watch, where magnets cause it to snap into place automatically. It’s a completely sealed system free of exposed contacts. And it’s very forgiving, requiring no precise alignment.

Watch Magnetic Charger to USB-C Cable (1m)

We wanted to make charging your Apple Watch utterly effortless. Simply hold the connector near the back of the watch, where magnets cause it to snap into place automatically. It’s a completely sealed system free of exposed contacts. And it’s very forgiving, requiring no precise alignment.

Belkin Wireless Charging Pad 7.5W Black

Finish: Black

Available only at Apple, the Belkin BOOST↑CHARGE™ Wireless Charging Pad 7.5W Special Edition delivers up to 25% faster wireless charging to your iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max. Just set your iPhone or AirPods onto the pad to instantly begin charging. Designed to work with lightweight protective cases, the charging pad includes an LED indicator that confirms your device is aligned and charging. Premium Design Premium stainless-steel construction and highly polished chrome finish are as durable as they are good-looking, and the small footprint takes up minimal space. Wireless AirPod Charging The Qi Wireless pad is also designed for AirPods with Wireless Charging case and AirPods Pro to create a versatile charging station. Case Compatible No need to remove your case because the wireless charging pad can charge through most cases up to 3mm. Qi Certified Qi is the standard in wireless technology that uses inductive charging. The BOOST↑Charge Wireless Charging Pad has

Cygnett MagMount Qi Wireless 7.5W Car Charger

Finish: Red

The Cygnett MagMount Qi Wireless Car Charger combines the most convenient way to attach your phone securely in your car for perfect driving viewing with the ability to charge your device simultaneously. Free your phone and utilize the latest in car holders and wireless technology.

Belkin Pocket Power 2K Power Bank

2,000 mAh battery
Finish: Black

PORTABLE CHARGING BACKUP FOR MOBILE DEVICES The Power Pack 2000 lets you keep your devices charged no matter where you are. This versatile charging device lets you charge tablets, e-readers, and other USB-enabled devices even when you don't have access to a power outlet or a computer. Simply charge the battery pack before leaving your house and connect it to your device using your charging USB cable whenever you need a charge. The Power Pack 2000 ensures that you'll always have an extra charge within reach. With its compact and lightweight design, it easily slips into any handbag or backpack. RETAINS CHARGE FOR DAYS With the Power Pack 2000, you'll always have a reliable backup if you run out of charging options. The battery pack is rated for 2,000 mAh and remains charged for days after you last plugged it in. Use it to provide your phone with a quick boost for those times when you need to make a call or text. BROAD COMPATIBILITY The Belkin Power Pack 2000 is compatible with any device that charges via a USB cable, including most tablets, smartphones, and additional devices that charge with a USB cable.

Belkin BOOST↑CHARGE™ Power Bank 10K with Lightning Connector + Lightning Cable

10,000 mAh battery
Finish: Silver

Designed especially for iPhone and iPad, this portable power bank is the first-to-market MFi-certified power bank to recharge via Lightning connector, allowing you to use the same Lightning cable to charge the power bank, as you use to charge your iPhone. A 6-inch Lightning to USB-A cable is included for added convenience. This one-cable solution makes this small, thin, lightweight power bank (aka portable charger) ideal for on-the-go charging and is fully MFi-certified to guarantee compatibility with iPhone and iPad.

Belkin Pocket Power 5K Power Bank Lightning

5,000 mAh battery
Finish: Silver

Designed especially for iPhone and iPad, this portable power bank is the first-to-market MFi-certified power bank to recharge via Lightning connector, allowing you to use the same Lightning cable to charge the power bank, as you use to charge your iPhone. A 6-inch Lightning to USB-A cable is included for added convenience. This one-cable solution makes this small, thin, lightweight power bank (aka portable charger) ideal for on-the-go charging and is fully MFi-certified to guarantee compatibility with iPhone and iPad.

Sandberg Wireless Charger Pad 10W Alu

10W
Finish: Black

With Sandberg Wireless Charger Pad, you can charge your smartphone completely wirelessly! Just place your smartphone on the stylish charging plate. That's all! Your phone will start charging immediately without any cables attached to it. The charger supports QI-compatible smartphones. Connectors: 1 x Micro USB female Input: 9V 1.8A / 5V 2.0A Output: 10W (Max.) Frequency: 110 - 205 KHz Charging distance: ≤10 mm Charging efficiency: 85% Wireless standard: Qi

Sandberg In Car Wireless Charger 5W

Supports QI-compatible smartphones
Finish: Black

Sandberg In Car Wireless Charger is a combined holder and wireless charger for your smartphone, which can easily be placed in the car’s wind shield with a suction cup. Simply place your smartphone in the holder with the adjustable clamps around it; the completely wireless charging will then start instantly. Supports QI-compatible smartphones. - Charge without cables - 2-in-1 phone holder & charger

Macally LED table lamp with wireless charging and USB Port

Compatible with iPhone 8 onwards
Finish: Black

Features Conveneniently charges two mobile devices at the same time to full capacity Wireless charging pad to charge any Qi-enabled smartphone, up to 10W power output 5.5"/14 cm circular base to support just about any sized smartphone USB port (5V, 2A) to quickly charge your smartphone, tablet and any other USB powered device Built-in LED (2700K) with a long lifespan and better LED energy efficiency than traditional lighting solutions Dimmable LED to adjust the light, from ambient light to direct light Stylish design to fit on any table, desk, nightstand, sideboard, etc. in any interior System requirements Works with any Qi-enabled smartphone Works with any smartphone, tablet and any other USB powered device Technical specifications Material: Color: Brushed metal / white lamp shade Dimensions: 17.25" (H) x 9.25" (W) x 9.25" (L) Weight: 2.30lbs Cable length: 6 ft /180 cm AC input: 100-240V, 50-60 Hz USB power output: 1 x DC 5V/2A Qi power output: 10W max Lamp technology: Built-in LED (non replaceable) Wattage lamp: 3.6 W Light color: 2700K warm white Lifetime: LED life approx. 25,000 hours Certification: CE, FCC Product standard: Qi WPC 1.2 / support QC2.0/QC3.0/PD5V Lamp shade type: Slip uno fitter/Screw Cap (E27) Lampshade size: E27, internal ring diameter x.x" (lamp shade reducer ring adapter not included)

Macally Car cup holder phone mount with wireless Qi charger

Finish: Black

The Macally MCUPXLQI is a car cup holder mount that allows you to wirelessly charge any Qi enabled smartphone, with or without a protective case*, between 2.1"" ~ 4.7""/5,4 ~ 12 cm. The mount has a 4”/10 cm long neck and 360-degree rotatable holder for the best viewing angle and allows you to do hands-free phone calls and use your smartphone as a navigator without blocking your view. The holder has adjustable grips and foot support to easily align your Qi enabled smartphone with the Qi charging coil position for optimal charging and a secure grip. Optimized for wireless fast charging, it charges up to 40% faster than standard Qi wireless chargers (only applicable to smartphones that are also wireless fast charge enabled). It also has built-in FOD which means that when it detects a foreign object on your Qi enabled smartphone, such as a metal plate, the charging process will promptly stop to prevent overheating and damage to your smartphone. The Macally MCUPXLQI works with any car with a cup holder with a width between 2.6” ~ 3.6""/6,5 ~ 9,3 cm, a built-in USB port or USB car charger and any Qi enabled smartphone between between 2.1"" ~ 4.7""/5,4 ~ 12 cm, like iPhone XS, XR, X, 8 Plus and 8, Samsung Galaxy S9 Plus, S9 and Note 8, Nokia 8 Sirocco, LG G7 ThinQ and V35 ThinQ, Sony Xperia XZ2 and XZ2 Premium, etc. Features Optimized for wireless charging of all Qi enabled smartphones with a width between 2.1" ~ 4.7"/5.4 ~ 12.0 cm Adjustable bottom phone stabilizer to correctly align your Qi enabled Smartphone charging coil position Up to a 40% faster charge than standard Qi wireless chargers (only applicable to wireless fast charge enabled smartphones) Built in FOD (Foreign Object Detection) to prevent overheating and damage to your Qi enabled device. 4"/10 cm flexible neck and 360° rotatable holder to achieve an optimal viewing angle System requirements Car with cup holder Car with USB-A port or car charger with USB-A port Qi enabled smartphone Technical specifications Product standard: Qi WPC 1.2 / support QC2.0/QC3.0/PD5V. Input voltage / current: DC 5V / 2A, 9V / 2A Maximum output power: 10W Charging frequency: 110-205 KHz Charging distance: 8mm Charging efficiency: ≥75% Over-voltage / over-current / over-temperature / short circuit / foreign body or metal (barrier detection) protection Certification: Qi, CE, FCC

Sandberg In Car Wireless Charger IR 10W with Automatic Arms

Supports QI-compatible smartphones
Finish: Black

Sandberg In Car Wireless Charger IR is a combined holder and wireless charger for your smartphone, with motor-driven clamps. The holder is fitted with an infra-red sensor that automatically opens the adjustable clamps and closes them gently around your smartphone. Wireless charging starts immediately. The clamps open again with a light touch on the touch-sensitive button on the side of the holder. Supports Qi-compatible smartphones and fast charge up to 10W

Sandberg In Car Wireless Charger 5W repackaged

Supports QI-compatible smartphones
Finish: Black

Sandberg In Car Wireless Charger is a combined holder and wireless charger for your smartphone, which can easily be placed in the car’s wind shield with a suction cup. Simply place your smartphone in the holder with the adjustable clamps around it; the completely wireless charging will then start instantly. Supports QI-compatible smartphones. - Charge without cables - 2-in-1 phone holder & charger

OtterBox Wireless Charging Pad

10W
Finish: Black

It’s a charging pad made by OtterBox. Reliable. Durable. It gets the job done. The charging pad delivers up to 10 watts of power to charge Qi wireless enabled devices fast. Additionally, its anti-slip surface is designed to hold devices in place during charging. Anti-slip surface holds device in place during charging Durable and simplified design blends into its surroundings LEDs indicate charging status at a glance Up to 10-watt fast charge to fully power up devices fast

Sandberg Wireless Charger Suction Ring

Supports QI-compatible smartphones
Finish: Black

With Sandberg Wireless Charger Suction Ring, you can charge your smartphone completely wirelessly! Just place your smartphone on the stylish charging plate. That's all! Your phone will start charging immediately without any cables attached to it. The charger supports QI-compatible smartphones. Connectors: 1 x Micro USB female Input: 9V 1.8A / 5V 2.0A Output: 10W (Max.) Frequency: 110 - 205 KHz Charging distance: ≤10 mm Charging efficiency: 85% Wireless standard: Qi